Bend Pogopin

Bending Pogo Pins are usually bent at the tail, providing designers with more choices in space utilization. Bending POGO PIN connectors are mainly composed of POGO connector rubber core, POGO terminal, POGO rubber core back plug, POGO The terminal is arranged in the POGO connector rubber core, and is fixed by the back plug of the POGO rubber core. The POGO terminal is a continuous metal sheet, the end of the POGO terminal is a straight structure, and the middle section of the POGO terminal is a continuous U-shaped bending structure. , The first end of the POGO terminal is provided with a contact, and the contact is a bullet structure. Specifically, the inside of the POGO connector rubber core is provided with a slot corresponding to the POGO terminal, and the front end of the slot is provided with a contact corresponding to the first end of the POGO terminal The round hole of the point; the POGO terminal is fixedly arranged in the slot, and the front contact of the POGO terminal is snapped on the round hole and extends to the outside of the POGO connector rubber core.

Main Features of Bending Pogo Pin

1. Long service life, the number of times of use can reach more than 100,000 times

2. No mold opening, convenient for customer customization and cost saving

3. Elasticity can be accurately measured and adjusted

4. Production mode that is convenient for customer diversity (SMT, plug-ins, etc.)

5. Small spacing, saving space, giving designers a more flexible configuration structure

6. Low inductance, better high frequency solution

7. Compliant with RoHS and HF (connector) requirements

Bending Pogo Pin Basic Parameters

Item parameter 1 parameter 2 parameter 3

Material Needle\/Tube: Yellow Barrel Spring: Stainless Steel

Plated Needle: 0.1um Gold Plated, 1.4um Nickel Plated Tip: 0.4um Gold Plated, 1.4um Nickel Plated

Electrical Properties Contact Resistance: 30mOhm Max. Rated Voltage: 36V DC Max Standard Current: 2.0A

Mechanical Properties Durability: 10,000 cycle min.

PG2.0-6P-4.0-1.5

PIN2.5-11.3