Magnetic charging cable made of magneticpogopin connectorIt is composed of the characteristics of the connecting wire. The principle is to use the principle that the magnets repel and attract each other at the same level. The positive and negative poles of the magnet disconnect the connector from the end of the wire. When the positive and negative magnetic forces are energized, they can be automatically absorbed within a certain distance to achieve Charging function. The magnetic pogopin connector suction is a good positive suction. When we want to switch, we remove everything from the left and right side of the connector. It's the same as the suction cup. You have a hard time pulling forward, But it's still hard if you use lateral force.
One of the pain points of data cables is that traditional connectors are easy to break, either the wire body is damaged, or the connector is broken. The magnetic pogopin connector is reinforced with nylon rope, which achieves a dual balance of flexibility and durability. And the connector's lead-out position and The wire body is reinforced with TPE, so there is no problem with repeated bending.
Magnetic pogopin connectors are made of higher strength zinc alloy. Because the bright metal is smoother, small grooves are designed on the 2 side of the connector, and the line design increases friction. The design of the small terminal output is similar to the USB terminal, but this terminal Is magnetic, easy to use with magnetic data connectors. From the magnifying glass we can see that the small end is a male plug with 7 metal pins on the 2 side (14 pins in total).
Corresponding TypeC, Lightning, Micro-USB magnetic connectors are all female plugs, with corresponding pins on one or both sides. With proper magnetic force, the data cable and the data head can be absorbed together well, forming a form suitable for different applications A satisfactory data cable for the scene. Besides, the data head can also be left on the device. When you want to charge or transfer data, you can simply suck it, very simple and convenient. There is also a small LED indicator on the data cable , used to display the power status of the data line.
The characteristic stability test of the magnetic wave high-level connector, for the suction problem. If the phone falls into the water or the ditch, you can use the data cable to suck it up. And the data cable and the data head can be absorbed quickly and easily. Very strong . From the actual measurement, after sucking, there is no pressure to lift the ipad.